查看“AllCategories”的源代码

{{DISPLAYTITLE:所有类别}}
=Bootloard=
{|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" 
|- valign="top"
| width="33%" |
*[[How_to_boot_the_kernel_via_TFTP_from_U-Boot]]
*[[How_to_update_U-Boot_on_an_SD_card]]
*[[How_to_use_USB_mass_storage_in_U-Boot]]
*[[UBoot]]
*[[UBootCmdFDT]]
*[[UBootCmdGroupDownload]]
*[[UBootCmdGroupEnvironment]]
*[[UBootCmdGroupExec]]
*[[UBootCmdGroupFlash]]
*[[UBootCmdGroupInfo]]
*[[UBootCmdGroupMemory]]
*[[UBootCmdGroupMisc]]
*[[UBootCmdGroupSpecial]]
*[[UBootManual]]
*[[UBootStorageDevices]]
||

||

|}
=Linux内核相关=

==内核驱动相关==

{|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" 
! 高速通信设备 !!   低速通信设备 !! 网络子系统
|- valign="top"
| width="33%" |
*alsa声卡相关
:*[[ALSA_overview | linux alsa声卡概述]]
:*[[ALSA_troubleshooting_grid  | linux alsa声卡故障排除]]
:*[[How_to_play_audio | 如何播放音频]]
:*[[How_to_record_audio | 如何录音]]
:*[[I2S_device_tree_configuration | I2S协议如何配置设备树]]
:*[[I2S_Linux_driver | I2S协议linux驱动]]
:*[[SAI_device_tree_configuration | SAI协议设备树配置]]
:*[[SAI_Linux_driver | SAI协议Linux驱动]]
:*[[Soundcard_configuration | 声卡配置]]
:*[[SPDIFRX_device_tree_configuration  | SPDIFRX协议设备树配置]]
:*[[SPDIFRX_Linux_driver | SPDIFRX协议Linux驱动]]
:*[[Audio_troubleshooting_grid | 音频故障排除]]
:*[[PulseAudio | PulseAudio工具]]
*USB设备相关
:*[[USB overview | USB 概述 ]]
:*[[PHY overview | USB PHY 层架构概述 ]]
:*[[USBH device tree configuration | USB设备树配置 ]]
:*[[USBPHYC device tree configuration　| USB PHY层设备树配置]]
:*[[OTG device tree configuration | USB OTG 设备树配置]]

| width="33%" |
*CAN协议相关
:*[[CAN overview | CAN协议概述]]
:*[[FDCAN device tree configuration|CAN设备树配置]]
:*[[How_to_set_up_a_SocketCAN_interface|如何设置CAN套接字接口]]
:*[[How to send or receive CAN data |如何发送或接收CAN数据]]
*串口设备相关
:*[[ How to use TTY from an application | 如何通过app使用TTY]]
:*[[How to use TTY with User Terminal | 如何在用户终端下使用TTY]]
:*[[Serial TTY device tree configuration | 串行TTY设备树配置]]
:*[[Serial TTY line discipline | 串行TTY线路描述]]
:*[[Serial TTY overview | TTY 架构概述]]
:*[[TTY tools | TTY调试工具]]
*SPI设备相关
:*[[SPI overview | SPI架构概述 ]]
:*[[SPI device tree configuration | SPI设备树配置]]
:*[[How to use SPI | 如何使用SPI]]
*I2C设备相关
:*[[I2C overview | I2C协议概述]]
:*[[I2C i2c-dev | I2C设备 ]]
:*[[I2C device tree configuration | I2C设备树配置]]
:*[[I2C driver | I2C驱动]]
:*[[I2C i2c-tools | I2C测试工具]]

| width="33%" |

*蓝牙相关
:*[[Bluetooth overview | 蓝牙概述 ]]
:*[[Bluetooth device tree configuration |  蓝牙设备树配置]]
:*[[How to scan BLE devices | 如何扫描低功耗蓝牙设备]]
:*[[How to scan Bluetooth devices | 如何扫描标准蓝牙设备]]
:*[[How to set up a Bluetooth connection |如何设置蓝牙设备连接]]
*WIFI设备相关
:*[[WLAN overview|WIFI概述]]
:*[[WLAN device tree configuration|WIFI设备树配置]]
:*[[How to configure a wlan interface on client mode | 如何配置waln设备客户端模式]]
:*[[How to configure a wlan interface on hotspot mode|如何配置wlan设备热点模式]]
:*[[How to setup wifi connection|如何设置WiFi连接]]
*以太网相关
:*[[Ethernet overview | 以太网概述 ]]
:*[[How to configure ethernet interface | 如何配置以太网接口]]
:*[[Ethernet device tree configuration  | 网络设备树配置]]
*网络测试
:*[[How to perform ping test | 如何执行ping测试]]
:*[[How to perform ssh connection | 如何执行SSH连接]]
:*[[Network tools | 网络工具]]
:*[[Networking overview |网络概述]]
:*[[Networking troubleshooting grid|网络故障排除]]

|}
==内核调试相关==
{|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" 

|- valign="top"
| width="33%" |
*[[Blktrace]]
*[[Dmesg and Linux kernel log]]
*[[Ftrace]]
*[[Ltrace]]
*[[LTTng]]
*[[Strace]]
*[[Trace-cmd and kernelshark trace viewer]]
| width="33%" |
*[[Debugfs]]
*[[Ethtool]]
*[[Ifconfig]]
*[[IP Linux command line]]
*[[Kmemleak]]
*[[Netdata]]
*[[Netstat]]
*[[Perf]]
| width="33%" |
*[[Pseudo filesystem]]
*[[Sysdig]]
*[[Sysprof]]
*[[Sysstat tool suite]]
*[[Systemtap]]
*[[Tcpdump]]
*[[Top Linux command line ]]
*[[Valgrind]]
|}

=文件系统相关=
==buildroot相关==
{|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" 
|- valign="top"
| width="33%" |
*[[Buildroot_Audio_and_video_applications]]
*[[Buildroot_BuildOptions]]
*[[Buildroot_Compressors_and_decompressors]]
*[[Buildroot_Debugging_profiling_and_benchmark]]
*[[Buildroot_Development_tools]]
*[[Buildroot_Filesystem_and_flash_utilities]]
*[[Buildroot_Fonts_cursors_icons_sounds_and_themes]]
*[[Buildroot_Games]]
*[[Buildroot_Graphic_libraries_and_applications]]
*[[Buildroot_Hardware_handling]]
*[[Buildroot_Interpreter_languages_and_scripting]]
*[[Buildroot_Libraries]]
*[[Buildroot_Mail]]
*[[Buildroot_Miscellaneous]]
*[[Buildroot_Networking_applications]]
*[[Buildroot_Package_managers]]
*[[Buildroot_Real-Time]]
*[[Buildroot_Security]]
*[[Buildroot_Shell_and_utilities]]
*[[Buildroot_System_tools]]
*[[Buildroot_SystemConfiguration]]
*[[Buildroot_TargetOptions]]
*[[Buildroot_Text_editors_and_viewers]]
*[[Buildroot_Toolchain]]
*[[How_to_add_a_new_package_to_buildroot]]
||

||

|}
==yocto相关==
==busybox相关==

=应用相关=