查看“TIM Linux driver”的源代码

== Article purpose ==
本文介绍了用于TIM内部外围设备的TIM Linux<sup>&reg;</sup> 驱动程序<ref name="TIM internal peripheral">[[TIM internal peripheral]]</ref>:
* 驱动程序支持哪些TIM功能
* 如何配置，使用和调试驱动程序
* 驱动程序的结构是什么，以及在哪里可以找到源代码。

== Short description ==
Linux驱动程序（内核空间）“ TIM” <ref name="TIM internal peripheral"/> 基于 [[PWM overview|PWM]] 和 [[IIO overview|IIO]] 框架。 它提供了几种功能：

'''MFD驱动程序''':
* 处理寄存器，时钟和DMA<ref name="DMA internal peripheral">[[DMA_internal_peripheral]]</ref>资源
* 检测TIM计数器分辨率，例如 16或32位。
'''PWM驱动器''':
* 检测TIM通道数。
* 处理'''PWM输出'''通道。
*处理'''PWM捕捉'''通道（输入）。 请注意，PWM捕获依赖于由MFD内核处理的DMA。
'''IIO 驱动程序''':
* 处理其他内部外围设备的硬件''触发源''(与PWM同步)，例如ADC <ref name="adc_internal">[[ADC internal peripheral]]</ref>, DAC<ref name="dac_internal">[[DAC internal peripheral]]</ref>, DFSDM<ref name="dfsdm_internal">[[DFSDM internal peripheral]]</ref>.
* 处理‘正交编码器'''quadrature encoder''' interface<ref>[https://en.wikipedia.org/wiki/Rotary_encoder#Incremental_encoder Incremental encoder] Incremental encoder overview</ref>.

== Configuration ==
=== Kernel configuration ===
使用Linux Menuconfig工具在内核配置中激活TIM驱动程序<ref name="TIM internal peripheral"/>  [[Menuconfig or how to configure kernel]].

启用以下配置（及其依赖项）
* CONFIG_MFD_STM32_TIMERS
* CONFIG_PWM_STM32
* CONFIG_IIO_STM32_TIMER_TRIGGER

 Device Drivers  --->
   -> Multifunction device drivers  --->
      <*> Support for STM32 Timers
   -> Pulse-width modulation (PWM) support  --->
      <*> STMicroelectronics STM32 PWM
   -> Industrial I/O support  --->
      -> Triggers - standalone  --->
         <*> STM32 timer trigger

=== Device tree ===
配置TIM Linux内核驱动程序时，请参阅[[TIM device tree configuration]] 文章。

== How to use ==
[[PWM_overview#How_to_use_PWM_with_sysfs_interface|How to use PWM with sysfs interface]]

[[How to use the IIO user space interface#How to set up a TIM or LPTIM trigger using the sysfs interface|How to set up a TIM or LPTIM trigger using the sysfs interface]]

[[How to use the IIO user space interface#How to use the quadrature encoder with the sysfs interface|How to use the quadrature encoder with the sysfs interface]]

== How to trace and debug ==
Linux驱动程序“ TIM”<ref name="TIM internal peripheral"/> 可以通过REGMAP访问定时器寄存器。

它带有debugfs <ref name="debugfs">[[Debugfs]]</ref>条目，这些条目允许转储寄存器：


 $ ls
 40004000.timer  44000000.timer
 
 $ cd 44000000.timer
 $ cat registers
 000: 00000081
 004: 00000000
 008: 00000000
 00c: 00000000
 ...

它还带有tracepoints <ref name="ftrace">[[Ftrace]]</ref>:
 $ cd /sys/kernel/debug/tracing
 $ cat available_events | grep regmap
 ...
 regmap:regmap_reg_read
 regmap:regmap_reg_write

== Source code location ==
TIM Linux驱动程序源代码包括：
* {{CodeSource | Linux kernel | drivers/mfd/stm32-timers.c | stm32-timers.c MFD driver}} to handle common resources: registers, clock, dmas.
* {{CodeSource | Linux kernel | drivers/pwm/pwm-stm32.c | pwm-stm32.c PWM driver}} to handle PWM channel(s).
* {{CodeSource | Linux kernel | drivers/iio/trigger/stm32-timer-trigger.c | stm32-timer-trigger.c IIO driver}} to handle trigger source for other internal peripherals and quadrature encoder interface.
* {{CodeSource | Linux kernel | include/linux/mfd/stm32-timers.h}} and {{CodeSource | Linux kernel | include/linux/iio/timer/stm32-timer-trigger.h}} header files

==References==
<references />