“100ask stm32mp157 pro Kernel”的版本间的差异
来自百问网嵌入式Linux wiki
（创建页面，内容为“{{MARKDOWN}} # 外设配置 # ## Pinmux配置 ## ## dts层级结构 ## ## Audio类外设 ## ### WM8960芯片 ### ### SAI外设 ### ### SPDIFRX外设 ### ## GPIO LED…”） |
（→存储类外设） |
||
| （未显示同一用户的14个中间版本） | |||
| 第1行： | 第1行： | ||
| − | + | = Pinmux配置 = | |
| − | + | = dts层级结构 = | |
| − | + | = Audio类外设 = | |
| − | + | *[[ALSA_overview | linux alsa声卡概述]] | |
| − | + | *[[ALSA_troubleshooting_grid | linux alsa声卡故障排除]] | |
| − | + | *[[How_to_play_audio | 如何播放音频]] | |
| − | + | *[[How_to_record_audio | 如何录音]] | |
| − | + | *[[I2S_device_tree_configuration | I2S协议如何配置设备树]] | |
| + | *[[I2S_Linux_driver | I2S协议linux驱动]] | ||
| + | *[[SAI_device_tree_configuration | SAI协议设备树配置]] | ||
| + | *[[SAI_Linux_driver | SAI协议Linux驱动]] | ||
| + | *[[Soundcard_configuration | 声卡配置]] | ||
| + | *[[SPDIFRX_device_tree_configuration | SPDIFRX协议设备树配置]] | ||
| + | *[[SPDIFRX_Linux_driver | SPDIFRX协议Linux驱动]] | ||
| + | *[[Audio_troubleshooting_grid | 音频故障排除]] | ||
| + | *[[PulseAudio | PulseAudio工具]] | ||
| + | == WM8960芯片 == | ||
| − | + | == SAI外设 == | |
| − | |||
| − | |||
| − | + | == SPDIFRX外设 == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | = GPIO LED驱动 = | |
| − | + | = GPIO按键驱动 = | |
| − | + | == GPIO矩阵键盘 == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | = Video类外设 = | |
| − | + | == DCMI外设 == | |
| − | + | == OV5640摄像头模组 == | |
| + | = 网络类外设 = | ||
| + | *蓝牙相关 | ||
| + | :*[[Bluetooth overview | 蓝牙概述 ]] | ||
| + | :*[[Bluetooth device tree configuration | 蓝牙设备树配置]] | ||
| + | :*[[How to scan BLE devices | 如何扫描低功耗蓝牙设备]] | ||
| + | :*[[How to scan Bluetooth devices | 如何扫描标准蓝牙设备]] | ||
| + | :*[[How to set up a Bluetooth connection |如何设置蓝牙设备连接]] | ||
| + | *WIFI设备相关 | ||
| + | :*[[WLAN overview|WIFI概述]] | ||
| + | :*[[WLAN device tree configuration|WIFI设备树配置]] | ||
| + | :*[[How to configure a wlan interface on client mode | 如何配置waln设备客户端模式]] | ||
| + | :*[[How to configure a wlan interface on hotspot mode|如何配置wlan设备热点模式]] | ||
| + | :*[[How to setup wifi connection|如何设置WiFi连接]] | ||
| + | *以太网相关 | ||
| + | :*[[Ethernet overview | 以太网概述 ]] | ||
| + | :*[[How to configure ethernet interface | 如何配置以太网接口]] | ||
| + | :*[[Ethernet device tree configuration | 网络设备树配置]] | ||
| + | *网络测试 | ||
| + | :*[[How to perform ping test | 如何执行ping测试]] | ||
| + | :*[[How to perform ssh connection | 如何执行SSH连接]] | ||
| + | :*[[Network tools | 网络工具]] | ||
| + | :*[[Networking overview |网络概述]] | ||
| + | :*[[Networking troubleshooting grid|网络故障排除]] | ||
| + | == 4G模块驱动 == | ||
| + | === EC20模块 === | ||
| + | === ML302 === | ||
| − | + | = FDCAN外设 = | |
| − | + | *CAN协议相关 | |
| − | + | :*[[CAN overview | CAN协议概述]] | |
| − | + | :*[[FDCAN device tree configuration|CAN设备树配置]] | |
| − | + | :*[[How_to_set_up_a_SocketCAN_interface|如何设置CAN套接字接口]] | |
| − | + | :*[[How to send or receive CAN data |如何发送或接收CAN数据]] | |
| − | + | == CM4配置 == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | ||
| − | + | = 低速接口类外设 = | |
| − | + | == I2C外设 == | |
| − | + | *[[I2C overview | I2C协议概述]] | |
| − | + | *[[I2C i2c-dev | I2C设备 ]] | |
| − | + | *[[I2C device tree configuration | I2C设备树配置]] | |
| − | + | *[[I2C driver | I2C驱动]] | |
| − | + | *[[I2C i2c-tools | I2C测试工具]] | |
| − | + | === CM4配置I2C === | |
| − | + | ||
| − | + | == SPI外设 == | |
| − | + | *[[SPI overview | SPI架构概述 ]] | |
| − | + | *[[SPI device tree configuration | SPI设备树配置]] | |
| + | *[[How to use SPI | 如何使用SPI]] | ||
| + | === CA7配置SPI === | ||
| + | === CM4使用SPI === | ||
| + | === spidev驱动 === | ||
| + | |||
| + | == 串口外设 == | ||
| + | *串口设备相关 | ||
| + | :*[[ How to use TTY from an application | 如何通过app使用TTY]] | ||
| + | :*[[How to use TTY with User Terminal | 如何在用户终端下使用TTY]] | ||
| + | :*[[Serial TTY device tree configuration | 串行TTY设备树配置]] | ||
| + | :*[[Serial TTY line discipline | 串行TTY线路描述]] | ||
| + | :*[[Serial TTY overview | TTY 架构概述]] | ||
| + | :*[[TTY tools | TTY调试工具]] | ||
| + | === CA7串口设备树配置 === | ||
| + | === CM4配置串口 === | ||
| + | |||
| + | = 模拟类外设 = | ||
| + | == ADC外设 == | ||
| + | *[[ADC_Linux_driver | ADC架构概述]] | ||
| + | *[[ADC_device_tree_configuration | ADC设备树配置]] | ||
| + | |||
| + | === CM4配置ADC === | ||
| + | == DAC外设 == | ||
| + | *[[DAC_Linux_driver | DAC架构概述]] | ||
| + | *[[DAC_device_tree_configuration | DAC设备树树配置]] | ||
| + | === CM4配置DAC === | ||
| + | |||
| + | = DFSDM外设 = | ||
| + | *[[DFSDM_Linux_driver | DFSDM架构概述]] | ||
| + | *[[DFSDM_device_tree_configuration | DFDSM设备树配置]] | ||
| + | |||
| + | STM32MP15_clock_tree | ||
| + | = 显示类外设 = | ||
| + | *[[LTDC_device_tree_configuration | LTDC设备树配置]] | ||
| + | *[[DSI_device_tree_configuration | DSI设备树配置]] | ||
| + | *[[How_to_display_on_HDMI | 如何在HDMI上显示]] | ||
| + | *[[How_to_monitor_the_display_framerate | 如何捕获显示帧数]] | ||
| + | *[[How_to_get_name_and_current_status_of_a_DRM_connector ]] | ||
| + | *[[Vivante_GCNANO_GPU_overview | GPU驱动概述]] | ||
| + | == LCD背光驱动 == | ||
| + | == DSI外设 == | ||
| + | === LTDC外设 === | ||
| + | |||
| + | = 核心类外设 = | ||
| + | == RTC驱动 == | ||
| + | * [[RTC_overview | rtc架构概述]] | ||
| + | * [[How_to_use_the_RTC | 如何使用rtc ]] | ||
| + | * [[RTC_device_tree_configuration | RTC设备树配置]] | ||
| + | * [[How_to_set_rtc_system_clock | 如何设置rtc系统时钟]] | ||
| + | |||
| + | == TIM外设 == | ||
| + | *[[TIM_device_tree_configuration | TIM设备树配置]] | ||
| + | *[[TIM_Linux_driver | TIM架构概述]] | ||
| + | === CA7配置Capture功能 === | ||
| + | === CM4使用Timer === | ||
| + | === PWM输出配置 === | ||
| + | |||
| + | == Watchdog外设 == | ||
| + | === IWDG外设 === | ||
| + | === WWDG外设 === | ||
| + | == GPIO外设 == | ||
| + | |||
| + | = 高速接口类外设 = | ||
| + | == SDMMC外设 == | ||
| + | * [[MMC_overview | MMC架构简介]] | ||
| + | *[[SDMMC_device_tree_configuration | SDMMC设备设备树配置]] | ||
| + | === CM4配置SDMMC3 === | ||
| + | |||
| + | == USB设备驱动 == | ||
| + | :*[[USB overview | USB 概述 ]] | ||
| + | :*[[PHY overview | USB PHY 层架构概述 ]] | ||
| + | :*[[USBH device tree configuration | USB设备树配置 ]] | ||
| + | :*[[USBPHYC device tree configuration | USB PHY层设备树配置]] | ||
| + | :*[[OTG device tree configuration | USB OTG 设备树配置]] | ||
| + | == 存储类外设 == | ||
| + | * [[MTD_overview | MTD架构概述]] | ||
| + | * [[FMC_device_tree_configuration | FMC设备树配置]] | ||
| + | * [[QUADSPI_device_tree_configuration | QUADSPI设备树配置]] | ||
| + | === FMC外设 === | ||
| + | |||
| + | === QUADSPI外设 === | ||
| + | ==== CM4配置QSPI ==== | ||
| + | |||
| + | == 安全类外设 == | ||
| + | === CRC外设 === | ||
| + | === CRYP外设 === | ||
| + | === HASH外设 === | ||
| + | === RNG外设 === | ||
| + | |||
| + | |||
| + | =内核调试相关= | ||
| + | {|width="100%" style="text-align:left; background-color: rgba(255,255,255,0.2)" | ||
| + | |||
| + | |- valign="top" | ||
| + | | width="33%" | | ||
| + | *[[Blktrace]] | ||
| + | *[[Dmesg and Linux kernel log]] | ||
| + | *[[Ftrace]] | ||
| + | *[[Ltrace]] | ||
| + | *[[LTTng]] | ||
| + | *[[Strace]] | ||
| + | *[[Trace-cmd and kernelshark trace viewer]] | ||
| + | | width="33%" | | ||
| + | *[[Debugfs]] | ||
| + | *[[Ethtool]] | ||
| + | *[[Ifconfig]] | ||
| + | *[[IP Linux command line]] | ||
| + | *[[Kmemleak]] | ||
| + | *[[Netdata]] | ||
| + | *[[Netstat]] | ||
| + | *[[Perf]] | ||
| + | | width="33%" | | ||
| + | *[[Pseudo filesystem]] | ||
| + | *[[Sysdig]] | ||
| + | *[[Sysprof]] | ||
| + | *[[Sysstat tool suite]] | ||
| + | *[[Systemtap]] | ||
| + | *[[Tcpdump]] | ||
| + | *[[Top Linux command line ]] | ||
| + | *[[Valgrind]] | ||
| + | |} | ||
2020年9月18日 (五) 15:18的最新版本
目录
Pinmux配置
dts层级结构
Audio类外设
- linux alsa声卡概述
- linux alsa声卡故障排除
- 如何播放音频
- 如何录音
- I2S协议如何配置设备树
- I2S协议linux驱动
- SAI协议设备树配置
- SAI协议Linux驱动
- 声卡配置
- SPDIFRX协议设备树配置
- SPDIFRX协议Linux驱动
- 音频故障排除
- PulseAudio工具
WM8960芯片
SAI外设
SPDIFRX外设
GPIO LED驱动
GPIO按键驱动
GPIO矩阵键盘
Video类外设
DCMI外设
OV5640摄像头模组
网络类外设
- 蓝牙相关
- WIFI设备相关
- 以太网相关
- 网络测试
4G模块驱动
EC20模块
ML302
低速接口类外设
显示类外设
- LTDC设备树配置
- DSI设备树配置
- 如何在HDMI上显示
- 如何捕获显示帧数
- How_to_get_name_and_current_status_of_a_DRM_connector
- GPU驱动概述
