“WLAN overview”的版本间的差异

来自百问网嵌入式Linux wiki
 
(未显示同一用户的10个中间版本)
第1行: 第1行:
This article explains how the WLAN framework is composed, how to configure it, and how to use it.
+
本文介绍了WLAN框架的组成方式,配置方法以及使用方法。
  
 
== Purpose ==
 
== Purpose ==
  
A wireless LAN (WLAN) is a wireless computer network that links two or more devices using wireless communication to form a local area network (LAN) within a limited area such as a home, school, computer laboratory, campus, office building etc. This gives to the users the ability to move around within the area and yet still be connected to the network. Through a gateway, a WLAN can also provide a connection to the wider Internet. <br />
+
无线局域网(WLAN)是一种无线计算机网络,它使用无线通信链接两个或多个设备以在有限的区域内形成局域网(LAN),例如家庭,学校,计算机实验室,校园,办公楼等。 这使用户能够在该区域内四处移动,但仍可以连接到网络。通过网关,WLAN还可以提供与更广泛的Internet的连接。<br />
Linux<sup>&reg;</sup> wireless subsystem contains two major blocks: cfg80211 and mac80211, and they help the WiFi driver to interface with rest of the kernel and user space. <br />
+
Linux<sup>&reg;</sup> 无线子系统包含两个主要模块:cfg80211和mac80211,它们帮助WiFi驱动程序与内核的其余部分和用户空间建立接口。 <br />
In particular, cfg80211 provides configuration management services in the kernel. It also provides the management interface between the kernel and user space via nl80211. <br />
+
特别是,cfg80211在内核中提供配置管理服务。它还通过nl80211在内核和用户空间之间提供管理接口。 <br />
Both soft MAC and full MAC devices need to work with cfg80211. Mac80211 is a driver API that supports only software MAC devices<br />
+
软MAC(soft MAC)设备和完整MAC设备都需要与cfg80211一起使用。 Mac80211是仅支持软件MAC设备的驱动程序API<br />
  
WLAN can be used in many different use cases, as mentioned in [[#How to use WLAN|How to use WLAN]] section:
+
WLAN可以在许多不同的用例中使用,如[[#How to use WLAN|How to use WLAN]]部分所述:
* How to configure a wlan interface on client mode: [[How to configure a wlan interface on client mode|How to configure a wlan interface on client mode]]
+
* 如何在客户端模式下配置无线接口: [[How to configure a wlan interface on client mode|How to configure a wlan interface on client mode]]
* How to configure a wlan interface on hotspot mode: [[How to configure a wlan interface on hotspot mode|How to configure a wlan interface on hotspot mode]]
+
* 如何在热点模式下配置无线接口:[[How to configure a wlan interface on hotspot mode|How to configure a wlan interface on hotspot mode]]
  
 
==System overview==
 
==System overview==
第16行: 第16行:
  
 
===Description of the components===
 
===Description of the components===
''From User space to hardware''
+
''从用户空间到硬件''
*'''Application''' (User space)
+
*'''应用''' (用户空间)
There are lots of application which are using WLAN: such as Internet Browser,
+
有许多使用WLAN的应用程序:例如Internet浏览器,
Streaming applications, FTP applications.
+
流应用程序,FTP应用程序。
  
*'''WLAN tool''' (User space)
+
*'''WLAN工具''' (用户空间)
There are a set of utilities to manage wlan networks: [[Network_tools| Network tools]]
+
有一组实用程序可以管理WLAN网络: [[Network_tools| Network tools]]
  
*'''CFG80211 API''' (Kernel space)
+
*'''CFG80211 API''' (内核空间)
cfg80211<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/cfg80211], cfg80211</ref> is the configuration API for IEEE 802.11<ref>[https://en.wikipedia.org/wiki/IEEE_802.11], IEEE_802.11</ref> devices in Linux.<br />
+
cfg80211<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/cfg80211], cfg80211</ref> 是Linux中的IEEE 802.11<ref>[https://en.wikipedia.org/wiki/IEEE_802.11], IEEE_802.11</ref> 设备的配置API。<br />
- It bridges the User space  and  drivers,  and  offers  some  utility  functionality  associated  with
+
- 它桥接了用户空间和驱动程序,并提供了与IEEE 802.11相关的某些实用程序功能。<br />
IEEE  802.11.<br />
+
-Linux中的所有现代无线驱动程序都必须通过mac80211直接或间接地使用它,以便它们通过nl80211提供一致的API<ref>
- It must  be  used,  directly  or  indirectly  via  mac80211,  by  all modern wireless drivers in Linux, so that they offer a consistent API via nl80211<ref>
 
 
[https://wireless.wiki.kernel.org/en/developers/Documentation/nl80211], nl80211</ref>.<br />
 
[https://wireless.wiki.kernel.org/en/developers/Documentation/nl80211], nl80211</ref>.<br />
- It is interfaced with Netlink<ref>[https://en.wikipedia.org/wiki/Netlink], Netlink</ref> socket.
+
- 它与 Netlink<ref>[https://en.wikipedia.org/wiki/Netlink], Netlink</ref> socket 连接。
  
*'''MAC80211 framework''' (Kernel space)
+
*'''MAC80211框架''' (内核空间)
MAC80211 is a subsystem to the Linux kernel, which implements shared code for soft-MAC/half-MAC wireless
+
MAC80211是Linux内核的一个子系统,它实现了软MAC/半MAC无线共享代码<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/mac80211], mac80211</ref>
devices<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/mac80211], mac80211</ref>
 
  
*'''WLAN companion driver''' (Kernel space)
+
*'''WLAN配套驱动程序''' (内核空间)
WLAN companion driver register and control WLAN device.
+
WLAN配套驱动程序注册和控制WLAN设备。
  
*'''MMC framework: MMC Core''' (Kernel space)
+
*'''MMC框架:MMC核心''' (内核空间)
The '''MMC core''' ensures compliance with MultiMediaCard ('''MMC''')<ref>[https://www.jedec.org/standards-documents/technology-focus-areas/flash-memory-ssds-ufs-emmc/e-mmc MultiMediaCard], embedded MultiMediaCard specification</ref> / secure digital ('''SD''')<ref>[https://www.sdcard.org/ Secure Digital], secure digital specification</ref> / secure digital input/output ('''SDIO''')<ref>[https://www.sdcard.org/ Secure Digital Input Output], Secure Digital Input Output specification</ref>.<br />
+
'''MMC内核”'确保与MultiMediaCard('''MMC''')嵌入式<ref>[https://www.jedec.org/standards-documents/technology-focus-areas/flash-memory-ssds-ufs-emmc/e-mmc MultiMediaCard], MultiMediaCard规范安全数字('''SD''')</ref> / <ref>[https://www.sdcard.org/ Secure Digital], </ref> / 安全数字规范安全数字输入/输出('''SDIO ''')<ref>[https://www.sdcard.org/ Secure Digital Input Output], 安全数字输入输出规范</ref>.<br />
The communication link between MP1 and WLAN device is the SDIO bus.
+
MP1和WLAN设备之间的通信链接是SDIO总线。
  
*'''SDMMC driver''' (Kernel space)
+
*'''SDMMC驱动程序''' (内核空间)
More information in [[MMC overview]]  
+
有关更多信息,请参阅 [[MMC overview]]  
  
*'''STM32: SDMMC''' (Hardware)
+
*'''STM32: SDMMC''' (硬件)
More information in [[MMC overview]]
+
有关更多信息,请参阅 [[MMC overview]]
  
*'''External devices''' (Hardware)
+
*'''外部设备''' (硬件)
WLAN companion chip
+
WLAN配套芯片
  
 
===APIs description===
 
===APIs description===
  
MAC80211 is new wireless driver API, which implements the shared code for soft-MAC/half-MAC wireless
+
MAC80211是新的无线驱动程序API,它为soft-MAC / half-MAC无线设备实现共享代码<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/mac80211], mac80211</ref>
devices<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/mac80211], mac80211</ref>
 
  
cfg80211<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/cfg80211], cfg80211</ref> is the new driver configuration API for IEEE 802.11<ref>[https://en.wikipedia.org/wiki/IEEE_802.11], IEEE_802.11</ref> devices in Linux.<br />
+
cfg80211<ref>[https://wireless.wiki.kernel.org/en/developers/Documentation/cfg80211], cfg80211</ref> 是IEEE 802.11的新驱动程序配置API<ref>[https://en.wikipedia.org/wiki/IEEE_802.11], IEEE_802.11</ref> 在Linux中<br />
  
 
==Configuration ==
 
==Configuration ==
The WLAN API is not activated by default in ST deliveries. To active it, you can use Linux Menuconfig tool: [[Menuconfig or how to configure kernel | Menuconfig or how to configure kernel ]] and select:
+
默认情况下,在ST传送中不会激活WLAN API。 要激活它,可以使用Linux Menuconfig工具: [[Menuconfig or how to configure kernel | Menuconfig or how to configure kernel ]] 然后选择:
  
For Network features:
+
对于网络功能:
 
<pre>
 
<pre>
 
[*] Networking support  --->   
 
[*] Networking support  --->   
第81行: 第78行:
 
</pre>
 
</pre>
  
For example if the companion chip is Murata chip 1DX<ref>[http://wireless.murata.com/datasheet?/RFM/data/lbee5kl1dx.pdf], 1DX</ref>
+
例如,如果配套芯片是Murata芯片1DX<ref>[http://wireless.murata.com/datasheet?/RFM/data/lbee5kl1dx.pdf], 1DX</ref>
 
<pre>
 
<pre>
 
[*] Device Drivers  --->
 
[*] Device Drivers  --->
第90行: 第87行:
 
</pre>
 
</pre>
  
For STM32 SDMMC :
+
对于STM32 SDMMC:
see [[MMC_overview#Kernel_configuration | SDMMC configuration]]
+
请参阅[[MMC_overview#Kernel_configuration | SDMMC configuration]]
  
 
===Device tree===
 
===Device tree===
The DT bindings documentation deals with all required or optional [[Device tree|device tree]] properties.
+
DT绑定文档处理所有必需的或可选的 [[Device tree|device tree]] 属性。
  
Detailed DT configuration for STM32 peripherals: [[WLAN device tree configuration|WLAN device tree configuration]].
+
STM32外设的详细DT配置: [[WLAN device tree configuration|WLAN device tree configuration]].
  
 
== How to use WLAN ==
 
== How to use WLAN ==
  
 
=== How to use the WLAN user space interface ===
 
=== How to use the WLAN user space interface ===
Please see examples based on the following use cases:
+
请根据以下用例查看示例:
* How to setup wifi connection: [[How_to_setup_wifi_connection|How to setup wifi connection]]
+
* 如何设置wifi连接: [[How_to_setup_wifi_connection|How to setup wifi connection]]
* How to configure a wlan interface on client mode: [[How to configure a wlan interface on client mode|How to configure a wlan interface on client mode]]
+
* 如何在客户端模式下配置无线接口: [[How to configure a wlan interface on client mode|How to configure a wlan interface on client mode]]
* How to configure a wlan interface on hotspot mode: [[How to configure a wlan interface on hotspot mode|How to configure a wlan interface on hotspot mode]]
+
* 如何在热点模式下配置无线接口: [[How to configure a wlan interface on hotspot mode|How to configure a wlan interface on hotspot mode]]
  
 
==How to trace and debug the framework==
 
==How to trace and debug the framework==
 
=== How to monitor ===
 
=== How to monitor ===
Please give instruction to help the developer/user to get information about this framework in the Linux file system
+
请给出说明以帮助开发人员/用户在Linux文件系统中获取有关此框架的信息。
 
==== How to watch link quality ====
 
==== How to watch link quality ====
Proc filesystem provides information about Quality link:
+
Proc文件系统提供有关Quality链接的信息:
 
  {{Board$}} cat /proc/net/wireless  
 
  {{Board$}} cat /proc/net/wireless  
 
  Inter-| sta-|  Quality        |  Discarded packets              | Missed | WE
 
  Inter-| sta-|  Quality        |  Discarded packets              | Missed | WE
第116行: 第113行:
 
  wlan0: 0000    0    0    0        0      0      0      0      0        0
 
  wlan0: 0000    0    0    0        0      0      0      0      0        0
  
Example of stat:
+
STAT示例:
 
  {{Board$}} watch -d -n 3 "iw dev wlan0 station dump; iwconfig wlan0; cat /proc/net/wireless"
 
  {{Board$}} watch -d -n 3 "iw dev wlan0 station dump; iwconfig wlan0; cat /proc/net/wireless"
  
第157行: 第154行:
 
=== How to trace ===
 
=== How to trace ===
  
This part is as example in case the companion chip is Murata chip
+
本部分以村田芯片(Murata chip)为配套芯片为例
  
 
==== How to verify than the WLAN driver is well probed ====
 
==== How to verify than the WLAN driver is well probed ====
* In dmesg log, check "brcmfmac" logs :
+
* 在dmesg日志中,检查“ brcmfmac”日志 :
 
<pre>
 
<pre>
 
[  67.306154] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug  6 2017 23:19:25 version 7.45.98.30 (r666241 CY) FWID 01-f0b000
 
[  67.306154] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug  6 2017 23:19:25 version 7.45.98.30 (r666241 CY) FWID 01-f0b000
第171行: 第168行:
 
===== Add dynamic debug firmware traces =====
 
===== Add dynamic debug firmware traces =====
  
Need to activate in the kernel config: CONFIG_DYNAMIC_DEBUG, more info on the dynamic debug [[How_to_use_the_kernel_dynamic_debug]]
+
需要在内核配置中激活:CONFIG_DYNAMIC_DEBUG,有关动态调试的更多信息请参阅 [[How_to_use_the_kernel_dynamic_debug]]
  
 
  # cd /sys/kernel/debug/dynamic_debug/
 
  # cd /sys/kernel/debug/dynamic_debug/
  
Check all functions used to manage firmware:
+
检查用于管理固件的所有功能:
  
 
<pre>
 
<pre>
第188行: 第185行:
 
</pre>
 
</pre>
  
Add print info "+p" in all firmware functions (p: causes a printk() message to be emitted to dmesg)
+
在所有固件功能中添加打印信息“ + p”(p:导致将printk()消息发送到dmesg)
 
  # echo "file drivers/base/firmware_class.c +p" > control
 
  # echo "file drivers/base/firmware_class.c +p" > control
  
Now "p" option is added in all firmware functions.
+
现在,在所有固件功能中都添加了“ p”选项。
  
 
<pre>
 
<pre>
第208行: 第205行:
 
====== Enable debug features in the defconfig file ======
 
====== Enable debug features in the defconfig file ======
  
* Enable CPTCFG_BRCMDBG and CONFIG_DEBUG_FS
+
* 启用CPTCFG_BRCMDBG和CONFIG_DEBUG_FS
* Rebuild your kernel
+
* 重新构建内核
  
 
====== Enable brcmfmac debug log ======
 
====== Enable brcmfmac debug log ======
  
* Message levels are listed in '''drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h'''
+
* 消息级别在' '''drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h'''中列出
 
<pre>
 
<pre>
 
/* message levels */
 
/* message levels */
第242行: 第239行:
  
 
====== Examples ======
 
====== Examples ======
* Add TRACE and INFO
+
* 添加TRACE和INFO
 
  $ modprobe brcmfmac debug=0x6
 
  $ modprobe brcmfmac debug=0x6
  
* Add TRACE, INFO and SDIO
+
* 添加TRACE,INFO和SDIO
 
  $ modprobe brcmfmac debug=0x20006
 
  $ modprobe brcmfmac debug=0x20006
  
* Add TRACE, INFO and WIFI_FW_LOG
+
* 添加TRACE,INFO和WIFI_FW_LOG
 
  $ modprobe brcmfmac debug=0x00100006
 
  $ modprobe brcmfmac debug=0x00100006
  
第256行: 第253行:
 
==Source code location==
 
==Source code location==
  
The source files are located inside the Linux kernel.
+
源文件位于Linux内核中。
  
*'''Broadcom wlan driver''': of.c<ref>[https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+
*'''Broadcom WLAN驱动程序''': of.c<ref>[https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
 
],of.c</ref>
 
],of.c</ref>
  
 
==References==
 
==References==
 
<noinclude><references /></noinclude>
 
<noinclude><references /></noinclude>

2020年11月6日 (五) 09:59的最新版本

本文介绍了WLAN框架的组成方式,配置方法以及使用方法。

Purpose

无线局域网(WLAN)是一种无线计算机网络,它使用无线通信链接两个或多个设备以在有限的区域内形成局域网(LAN),例如家庭,学校,计算机实验室,校园,办公楼等。 这使用户能够在该区域内四处移动,但仍可以连接到网络。通过网关,WLAN还可以提供与更广泛的Internet的连接。
Linux® 无线子系统包含两个主要模块:cfg80211和mac80211,它们帮助WiFi驱动程序与内核的其余部分和用户空间建立接口。
特别是,cfg80211在内核中提供配置管理服务。它还通过nl80211在内核和用户空间之间提供管理接口。
软MAC(soft MAC)设备和完整MAC设备都需要与cfg80211一起使用。 Mac80211是仅支持软件MAC设备的驱动程序API

WLAN可以在许多不同的用例中使用,如How to use WLAN部分所述:

System overview

Alternate text
WLAN Overview

Description of the components

从用户空间到硬件

  • 应用 (用户空间)

有许多使用WLAN的应用程序:例如Internet浏览器, 流应用程序,FTP应用程序。

  • WLAN工具 (用户空间)

有一组实用程序可以管理WLAN网络: Network tools

  • CFG80211 API (内核空间)

cfg80211[1] 是Linux中的IEEE 802.11[2] 设备的配置API。
- 它桥接了用户空间和驱动程序,并提供了与IEEE 802.11相关的某些实用程序功能。
-Linux中的所有现代无线驱动程序都必须通过mac80211直接或间接地使用它,以便它们通过nl80211提供一致的API[3].
- 它与 Netlink[4] socket 连接。

  • MAC80211框架 (内核空间)

MAC80211是Linux内核的一个子系统,它实现了软MAC/半MAC无线共享代码[5]

  • WLAN配套驱动程序 (内核空间)

WLAN配套驱动程序注册和控制WLAN设备。

  • MMC框架:MMC核心 (内核空间)

MMC内核”'确保与MultiMediaCard(MMC)嵌入式[6] / [7] / 安全数字规范安全数字输入/输出(SDIO )[8].
MP1和WLAN设备之间的通信链接是SDIO总线。

  • SDMMC驱动程序 (内核空间)

有关更多信息,请参阅 MMC overview

  • STM32: SDMMC (硬件)

有关更多信息,请参阅 MMC overview

  • 外部设备 (硬件)

WLAN配套芯片

APIs description

MAC80211是新的无线驱动程序API,它为soft-MAC / half-MAC无线设备实现共享代码[9]

cfg80211[10] 是IEEE 802.11的新驱动程序配置API[11] 在Linux中

Configuration

默认情况下,在ST传送中不会激活WLAN API。 要激活它,可以使用Linux Menuconfig工具: Menuconfig or how to configure kernel 然后选择:

对于网络功能:

[*] Networking support  --->  
    [*] Networking options  --->
        [*] Packet socket 
        [*] TCP/IP networking
          [*] IP: kernel level autoconfiguration
            [*] IP: DHCP support
            [*] IP: BOOTP support
            [*] IP: RARP support
        [*] INET: socket monitoring interface
        [*] The IPv6 protocol
        [*] DNS Resolver support
    [*]   Wireless  --->
        [*]   cfg80211 - wireless configuration API
                [*]   cfg80211 wireless extensions compatibility
        [*]   Generic IEEE 802.11 Networking Stack (mac80211)

例如,如果配套芯片是Murata芯片1DX[12]

[*] Device Drivers  --->
    [*]   Network device support  --->
        [*]   Wireless LAN  --->
             [*]   Broadcom devices
                [*]   Broadcom FullMAC WLAN driver

对于STM32 SDMMC: 请参阅 SDMMC configuration

Device tree

DT绑定文档处理所有必需的或可选的 device tree 属性。

STM32外设的详细DT配置: WLAN device tree configuration.

How to use WLAN

How to use the WLAN user space interface

请根据以下用例查看示例:

How to trace and debug the framework

How to monitor

请给出说明以帮助开发人员/用户在Linux文件系统中获取有关此框架的信息。

How to watch link quality

Proc文件系统提供有关Quality链接的信息:

Board $> cat /proc/net/wireless 
Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE
face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 22
wlan0: 0000    0     0     0        0      0      0      0      0        0

STAT示例:

Board $> watch -d -n 3 "iw dev wlan0 station dump; iwconfig wlan0; cat /proc/net/wireless"
Every 3.0s: iw dev wlan0 station dump; iwconfig wlan0; cat /proc/net/wir...  stm32mp1: Sun Nov  4 16:32:52 2018

Station 00:16:b6:2c:47:36 (on wlan0)
       inactive time:  0 ms   
       rx bytes:       11001
       rx packets:     37
       tx bytes:       13077
       tx packets:     83
       tx failed:      0
       signal:         -72 [-72] dBm
       tx bitrate:     12.0 MBit/s
       rx bitrate:     1.0 MBit/s 
       authorized:     yes
       authenticated:  yes
       associated:     yes
       WMM/WME:        no
       TDLS peer:      yes
       DTIM period:    1
       beacon interval:100
       short preamble: yes
       short slot time:yes
       connected time: 55 seconds
wlan0     IEEE 802.11  ESSID:"NETWORK1"
         Mode:Managed  Frequency:2.462 GHz  Access Point: 00:16:B6:2C:47:36
         Bit Rate=12 Mb/s   Tx-Power=31 dBm
         Retry short limit:7   RTS thr:off   Fragment thr:off
         Encryption key:off
         Power Management:on
         Link Quality=38/70  Signal level=-72 dBm
         Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
         Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE
face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 22
wlan0: 0000   38.  -72.  -256        0      0      0      0      0        0

How to trace

本部分以村田芯片(Murata chip)为配套芯片为例

How to verify than the WLAN driver is well probed

  • 在dmesg日志中,检查“ brcmfmac”日志 :
[   67.306154] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug  6 2017 23:19:25 version 7.45.98.30 (r666241 CY) FWID 01-f0b000
[   67.326146] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05 
[   67.676323] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)

How to debug the WLAN driver

Add dynamic debug firmware traces

需要在内核配置中激活:CONFIG_DYNAMIC_DEBUG,有关动态调试的更多信息请参阅 How_to_use_the_kernel_dynamic_debug

# cd /sys/kernel/debug/dynamic_debug/

检查用于管理固件的所有功能:

# cat control | grep firmware
drivers/base/firmware_class.c:339 [firmware_class]__fw_free_buf =_ "%s: fw-%s buf=%p data=%p size=%u\012"
drivers/base/firmware_class.c:462 [firmware_class]fw_set_page_data =_ "%s: fw-%s buf=%p data=%p size=%u\012"
drivers/base/firmware_class.c:1102 [firmware_class]_request_firmware_prepare =_ "using built-in %s\012"
drivers/base/firmware_class.c:290 [firmware_class]__allocate_fw_buf =_ "%s: fw-%s buf=%p\012"
drivers/base/firmware_class.c:1194 [firmware_class]_request_firmware =_ "firmware: %s loading timed out\012"
drivers/base/firmware_class.c:423 [firmware_class]fw_get_filesystem_firmware =_ "loading %s failed with error %d\012"
drivers/base/firmware_class.c:429 [firmware_class]fw_get_filesystem_firmware =_ "direct-loading %s\012"

在所有固件功能中添加打印信息“ + p”(p:导致将printk()消息发送到dmesg)

# echo "file drivers/base/firmware_class.c +p" > control

现在,在所有固件功能中都添加了“ p”选项。

# cat control | grep firmware
drivers/base/firmware_class.c:339 [firmware_class]__fw_free_buf =p "%s: fw-%s buf=%p data=%p size=%u\012"
drivers/base/firmware_class.c:462 [firmware_class]fw_set_page_data =p "%s: fw-%s buf=%p data=%p size=%u\012"
drivers/base/firmware_class.c:1102 [firmware_class]_request_firmware_prepare =p "using built-in %s\012"
drivers/base/firmware_class.c:290 [firmware_class]__allocate_fw_buf =p "%s: fw-%s buf=%p\012"
drivers/base/firmware_class.c:1194 [firmware_class]_request_firmware =p "firmware: %s loading timed out\012"
drivers/base/firmware_class.c:423 [firmware_class]fw_get_filesystem_firmware =p "loading %s failed with error %d\012"
drivers/base/firmware_class.c:429 [firmware_class]fw_get_filesystem_firmware =p "direct-loading %s\012"
FMAC debug
Enable debug features in the defconfig file
  • 启用CPTCFG_BRCMDBG和CONFIG_DEBUG_FS
  • 重新构建内核
Enable brcmfmac debug log
  • 消息级别在' drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h中列出
/* message levels */
#define BRCMF_TRACE_VAL 0x00000002
#define BRCMF_INFO_VAL 0x00000004
#define BRCMF_DATA_VAL 0x00000008
#define BRCMF_CTL_VAL 0x00000010
#define BRCMF_TIMER_VAL 0x00000020
#define BRCMF_HDRS_VAL 0x00000040
#define BRCMF_BYTES_VAL 0x00000080
#define BRCMF_INTR_VAL 0x00000100
#define BRCMF_GLOM_VAL 0x00000200
#define BRCMF_EVENT_VAL 0x00000400
#define BRCMF_BTA_VAL 0x00000800
#define BRCMF_FIL_VAL 0x00001000
#define BRCMF_USB_VAL 0x00002000
#define BRCMF_SCAN_VAL 0x00004000
#define BRCMF_CONN_VAL 0x00008000
#define BRCMF_BCDC_VAL 0x00010000
#define BRCMF_SDIO_VAL 0x00020000
#define BRCMF_MSGBUF_VAL 0x00040000
#define BRCMF_PCIE_VAL 0x00080000
#define BRCMF_FWCON_VAL 0x00100000
$ modprobe brcmfmac debug=${BRCMF_Message_Level}
$ dmesg -n 8
Examples
  • 添加TRACE和INFO
$ modprobe brcmfmac debug=0x6
  • 添加TRACE,INFO和SDIO
$ modprobe brcmfmac debug=0x20006
  • 添加TRACE,INFO和WIFI_FW_LOG
$ modprobe brcmfmac debug=0x00100006
How to check wlreg_on status and voltage setting
$ cat /sys/kernel/debug/regulator/regulator_summary

Source code location

源文件位于Linux内核中。

  • Broadcom WLAN驱动程序: of.c[13]

References

  1. [1], cfg80211
  2. [2], IEEE_802.11
  3. [3], nl80211
  4. [4], Netlink
  5. [5], mac80211
  6. MultiMediaCard, MultiMediaCard规范安全数字(SD
  7. Secure Digital,
  8. Secure Digital Input Output, 安全数字输入输出规范
  9. [6], mac80211
  10. [7], cfg80211
  11. [8], IEEE_802.11
  12. [9], 1DX
  13. [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c ],of.c