Gst-play

Overview

gst-play (gst-play-1.0) is a GStreamer command line utility available with GStreamer-1.X.

This utility plays multimedia content using the Playbin element as a basic player. It takes as an input either individual files, URLs or a whole directories (in this case it will recurse into sub-directories as well).

Usage

gst-play accepts the following options:

Board $> gst-play-1.0 --help

Usage:
  gst-play-1.0 [OPTION?] FILE1|URI1 [FILE2|URI2] [FILE3|URI3] ...

Help Options:
  -h, --help                        Show help options
  --help-all                        Show all help options
  --help-gst                        Show GStreamer Options

Application Options:
  -v, --verbose                     Output status information and property notifications
  --flags                           Control playback behaviour setting playbin 'flags' property
  --version                         Print version information and exit
  --videosink                       Video sink to use (default is autovideosink)
  --audiosink                       Audio sink to use (default is autoaudiosink)
  --gapless                         Enable gapless playback
  --shuffle                         Shuffle playlist
  --no-interactive                  Disable interactive control via the keyboard
  --volume                          Volume
  --playlist                        Playlist file containing input media files
  -q, --quiet                       Do not print any output (apart from errors)

The user can control the playback through the host terminal keyboard. Press k to list the available keyboard shortcuts once the content is playing:

       <space>   Pause/Resume playback

       <up/down arrows>
               Volume up/down

       <left/right arrows>
               Seek back/forward

       +/-     Increase/decrease playback rate

       d       Reverse playback direction

       t       Cycle through trick modes

       a       Switch audio track

       s       Switch subtitle track

       v       Switch video track

       >       Skip to next item in playlist

       <       Go back to previous item in playlist

       q, ESC  Quit

Information provided by gst-play Ubuntu manual

Examples

Don't have 模板:Av ref file ? Follow instructions in this article.

To hear audio track, depending on the considered board, an audio headset must be plugged on the STM32MP157C-EV1 Evaluation board CN5 jack connector the STM32MP157X-DKX Discovery kit CN10 jack connector

Basic audio/video playback

Board $> gst-play-1.0 模板:Av ref file

Video only playback

Board $> gst-play-1.0 模板:Av ref file --audiosink=fakesink

Audio rendering is disabled, but audio decoding continues.

Playlist playback

Board $> gst-play-1.0 模板:Av ref file 模板:Av ref file 模板:Av ref file 模板:Av ref file

Press ">" key to play the next file, "<" key to play the previous one.

Loop or repeat the same video

This option is not currently available within gst-play but here are some alternatives:

• Playlist with the same video over and over. In the example below, the same video file is played 3 times. The video file can be added as many times as needed:

Board $> gst-play-1.0 模板:Av ref file 模板:Av ref file  模板:Av ref file

• For loop (here 1000 times):

Board $> for i in `seq 1 1000`;do gst-play-1.0 模板:Av ref file; done

Seek while playing

Board $> gst-play-1.0 模板:Av ref file 模板:Av ref file 模板:Av ref file 模板:Av ref file

Press "right arrow key" to seek forward, "left arrow key" to seek backward.

Change playback speed

Board $> gst-play-1.0 模板:Av ref file

Press "+" key to increase rate and "-" key to decreased it.

HTTP streaming

An internet connection is required, for example by plugging an Ethernet cable on the STM32MP157C-EV1 Evaluation board CN3 Ethernet connector the STM32MP157X-DKX Discovery kit CN8 Ethernet connector

<securetransclude src="ProtectedTemplate:InternalInfo" params="When connected on ST internal network, http requests must be redirected to appgw.gnb.st.com ST proxy using command:

Board $> export http_proxy'"`UNIQ--nowiki-00000002-QINU`"''"`UNIQ--nowiki-00000003-QINU`"'<login>:<pwd>@10.129.92.5:8080

See 如何避免代理问题 article for more details.

Then you can play the video:"></securetransclude>

Board $> gst-play-1.0 模板:Av ref http

Audio/video playback on HDMI TV

Plug first HDMI TV cable as described in How to display on HDMI article

Switch audio output on HDMI:

Board $> pacmd set-card-profile 0 output:hdmi-stereo

Than play the video:

Board $> gst-play-1.0 模板:Av ref file

Audio/video playback in background

Option --no-interactive must be set in order to be able to play in background:

Board $> gst-play-1.0 模板:Av ref file --no-interactive &
[1] 14998
root@stm32mp1:~# Now playing /av_h264_main_640x480_30fps_1000kbps_aac-lc_192kbps.mp4

Then to stop playback:

Board $> killall gst-play-1.0

or

Board $> fg
<CTRL+C>

<securetransclude src="ProtectedTemplate:PublicationRequestId" params="7660 | 2018-06-11 | BrunoB"></securetransclude>